LiquiSonic - Questionnaire
Company
Division
Name
Street
ZIP / city
Phone
Fax
E-Mail (required)
Description
Chemical structure
CAS-ID if available
Typical (working) range
Unit
Min. and max. concentration
Desired accuracy
Carrier component/solvant
Other components (1)
Concentration range
Other components (2)
Other components (3)
Typical (working) temperature
Min. and max. possible temperature
Cleaning temperature from
Cleaning agent
Ambient temperature
Pressure
Flow velocity
Gas bubbles appear?
Concentration
Solids or particles appear?
Grain size
Do you like to measure differnt components simultaneously
Ex-approval necessary?
Pipe
Diameter
Process flange
By-pass posssible / necessary
Pigable
Trace heating
yes no
Please specify L3
in mm in Inch
L3 = flange top edge until middle of the pipe
Vessel / Tank
Heating jacket
Material
Controller
Cable
Cable length between sensor point and controller location
How many sensors shall be managed by one controller (up to 4 possible)?
Detailed application and process description
Remark If possible we appreciate to have samples of the above mentioned liquid for calibration. Two approaches are possible: (1) • About 3 Liter concentrated solution (solvant/carrier and target component) with information about the concentration of the target • Solvant/carrier, to dillute the concentrated solution down to the minimum typical concentration • Other components(each separate) (2) • All components separate (target-, solvant/carrier-, other components) to blend about 3l high concentrated solution to be dilluted down to the minimum typical concentration. Larger volumes, handling and safety instructions and analysis sheets are appreciated if available.
Remark If possible we appreciate to have samples of the above mentioned liquid for calibration. Two approaches are possible:
(1) • About 3 Liter concentrated solution (solvant/carrier and target component) with information about the concentration of the target • Solvant/carrier, to dillute the concentrated solution down to the minimum typical concentration • Other components(each separate)
(2) • All components separate (target-, solvant/carrier-, other components) to blend about 3l high concentrated solution to be dilluted down to the minimum typical concentration.
Larger volumes, handling and safety instructions and analysis sheets are appreciated if available.
