To German VersionTo English VersionSTo Spanish VersionTo Russian VersionTo Korean VersionTo Chinese Version
SensoTech GmbH
analyze the process

LiquiSonic Questionnaire

We are glad that you are interested in our LiquiSonic product range. The following application questionnaire gives you the possibility to contact us and inform us about the measuring conditions of your application. With these parameters, we are able to concentrate specifically on your request. You will get an answer as soon as possible.
You are more than welcome to send us your request by e-mail, phone or fax. 
Click here for contact information.

 

Your address
Company
Division
Name
Street
ZIP / city
Phone
Fax
E-Mail (required)
 
Please specifiy if known the following parameters, if no specific requirements exist please let the field blank.
 

Liquid/Substance
Image
Target component
Description
Chemical structure
CAS-ID if available
Image
Concentration area
from to
Unit
Min. and max. concentration min. max.
Unit
Desired accuracy
Unit
Image
Carrier component/solvant
Description
Chemical structure
Other components (1)
Description
Chemical structure
Concentration range
Unit
Other components (2)
Description
Chemical structure
Concentration range
Unit
Other components (3)
Description
Chemical structure
Concentration range
Unit
Typical (working) temperature from °C to °C
Min. and max. possible temperature from °C to °C
Cleaning temperature from from °C to °C
Cleaning agent
Ambient temperature from to °C
Pressure from to bar
Flow velocity from to m/s
Gas bubbles appear? yes
no
Concentration from to vol%
Solids or particles appear? yes
no
Grain size from to µm
Do you like to measure different components simultaneously? yes
no
Ex-approval necessary? yes
no
Image
Sensor
Image
Pipe  
Diameter
DIN in mm
ANSI in Inch
Process flange
DIN in mm
ANSI in Inch
By-pass posssible / necessary yes
no
Pigable yes
no
Trace heating yes
no
Please specify L3

in mm
in Inch
L3 = flange top edge until middle of the pipe
Vessel / Tank
Heating jacket yes
no
Material stainless steel DIN 1.4471 (equivalent SS316Ti)
Tantalum
Hastelloy
Monel
titanium alloy
Controller  
Cable yes no
Cable length between sensor point and controller location m
How many sensors shall be managed by one controller (up to 4 possible)?
Detailed application and process description
Image

Remark
If possible we appreciate to have samples of the above mentioned liquid for calibration. Two approaches are possible:

(1)
• About 3 Liter concentrated solution (solvant/carrier and target component) with information about the concentration of the target
• Solvant/carrier, to dillute the concentrated solution down to the minimum typical concentration
• Other components(each separate)

(2)
• All components separate (target-, solvant/carrier-, other components) to blend about 3l high concentrated solution to be dilluted down to the minimum typical concentration.

Larger volumes, handling and safety instructions and analysis sheets are appreciated if available.

Image