The ultrasonic analyzer LiquiSonic® has a lot of applications in the chemical industry:
- concentration and density measurement of acids, alkalis, solvents, emulsions, suspensions, organic and inorganic liquids
- phase detection in pipes and vessels
- monitoring of polymerization and crystallization processes
- concentration measurement in gas scrubbers and alkylation units
Unbeatable utilization rates
The chemical industry sets high demands on housing, electronics and sensor technology. Our application specialists fit our systems into your requirements, because all components can be adapted to the existing process conditions.
Difficult profitability, quality control, and regulatory factors in the chemical industry make inline monitoring more important than ever. LiquiSonic® monitors and controls liquids in lines, reactors, filters, scrubbers, heat exchangers, waste lines, basins and almost anywhere liquids flow.
Where accuracy is critical, or where high pressure, high temperatures or sensitive processing environments make sampling impractical or impossible, SensoTech analyzers are ideal for monitoring inline processes.
LiquiSonic® sensors are engineered for tough industrial processes, including Class I Division 1 Hazardous Area installations.
A rugged housing is crucial for protection and high mechanical stability. Depending on the sensor type our housings are able to withstand temperatures up to 200 °C or 392 ¡F, rated pressures up to 500 bar or 7,250 psi, and are resistant to lyes, acids and solvents.
The fundamentals for this are the high-grade materials used such as stainless steel, PTFE and PFA, alloy steels or tantalum. The sensor design consists of one homogenous body and requires no gaskets.
Sensors may be equipped with all common process adapters and fittings and can be used under the most complex application conditions.
By changing immersion lengths or the process adapters, our sensors fit into tanks and vessels of almost every design, as well as directly in every size tube.
A suitable entry point into the process also results from incorporation of the LiquiSonic® sensor into the bottom outlet valve of the company SchuF. So measuring directly in the vessel without additional process connection is possible. This innovative and cost-efficient combination of sensor and valve is an ideal solution for process analytical applications in the pharmaceutical and fine chemical industry.
Because the LiquiSonic® measuring technology is not dependent on color, turbidity or other optical attributes, the user will have no limitations, even under the most difficult application conditions.
Products and process may change
LiquiSonic® systems can easily be adapted to accommodate various modified process conditions. The Controller software manages up to 256 various product characteristics. Depending on the user access rights, these characteristics may be activated after the sensor replacement or when process conditions change.
This concept ensures the return of your investment, and decreases your response time on changing boundary conditions. For new applications, you can create a complete new calculation model using process reference values together with our highly sophisticated SonicWork software.
SensoTech is able to offer all current and emerging standards of signal processing. For continuous concentration and density measurement, 4-20 mA in 2-wire loop power, or 4-wire technology, Profibus PA or Foundation Fieldbus are available. For alarm level detection and switching, a non-contact output or a relay can be configured. SensoTech analyzers can always match your installation needs.